Fabric button manufacturing process:

Review of drawings, actual samples, product structure use-drawing, process design-mold processing-test mold, sample-determination of supplies, mass production of rough-washing oil / polishing / electroplating-other process treatment ( Grease/laser/silk screen, etc.)-inspection / test-packaging and delivery

Button inspection methods and standards:

1. Control sample or confirm sample. See if the color and model match the sample;

2. The surface of the button must not have nicks, cracks, unevenness and obvious scratches;

3. There are no car cracks and bubbles on the face and back; no rotten edges and uneven thickness;

4. The pattern should have no obvious deformation, no white eyes and white circles, etc.;

5. The buttonhole should be smooth and unobstructed; the pinhole should not be penetrated or broken, and should be symmetrical and without big eyes. If it is a dark eye button, the dark eye slot should be smooth and without obvious bursting.

6. After electroplating or other processing, the effect should be uniform. If some special effects are not consistent, they can be packaged separately.

7. The color difference of the same batch of buttons should not be lower than the GB250 level four standard, and should not be lower than the GB250 level three standard compared with the sample.

8. Packaging inspection, after the appearance inspection/performance test required by the customer is all qualified, then sub-packaging is carried out. The certificate or other label should be put in the packaging. The quantity of packaging should be in accordance with the regulations, and the actual quantity of each bag should be consistent with the prescribed quantity. If it is found that the tolerance is exceeded due to differences in thickness or other reasons, it must be fully inspected.

9. Anxious buttons/cartop buttons/five-jaw buttons shall be tested before shipment to test the button performance and usability, and provide mold and test samples to customers.